| 常规信息 | |
| 拓扑结构 | online double-conversion IGBT with micro-controller |
| 配置 | Tower |
| 型号 | EDX20KHXL31 |
| 零件号码 | EDX20KHXL31 |
| 额定（伏安/瓦特） | 20kVA / 14kW |
| UPS旁路 | In-Built Automatic Static Bypass, In-Built Manual Bypass Switch (interlocked) |
| 尺寸 (HxWxD, mm) | 717 x 260 x 570 |
| 重量 (kg) | 55 |
| 质保 | 1 year standard warranty |
| 效率 | >88% |
| 电输入 | |
| 输入连 接 |
Hardwired - see manual for terminal block layout
|
| 输入电压范围 | 380V, 415V |
| 标称输入电压（Vac） | 380 / 220 Vac three-phase |
| 工作频率 | 50/60Hz, auto-detection |
| 频率程度 | 46Hz - 64Hz |
| 输入功率因数 | > 0.95pf |
| 输入电流失真 | <30% THDi |
| 电输出 | |
| 标称输出电压 | 220V |
| 输出电压调节 | ±1% |
| 输出连接 |
Hardwired - see manual for terminal block layout
|
| 效率 （正常运行） | >88% |
| 输出频率 | 50 / 60Hz |
| 频率校准 | On Line Mode: Follows bypass frequency |
| 负载波形 | 3:1 |
| 电池 | |
| 电池类型 | No Internal batteries |
| 由电池启动运行 | User-Supplied External Battery |
| 二次充电时间 | Dependant on Ampere Hour Capacity, typically 10 times discharge time to 90% capacity |
| 通信 | |
| 用户界面 | LEDs |
| 发光二极管 | LED mimic diagram with 4 x LEDs for Utility, Bypass, Inverter & Battery Status, 5 LED Bar Graph for Load and Battery Capacity, Fault LED |
| 标准通信端口 | 1 off Intelligent-Slot (Empty), 1 x RS232 *9 Serial Port, Parallel Communications Port (maximum 3 units in parallel, N+1) |
| 电能管理软件 | WINPOWER power management software, included on CD |
| 环境 | |
| 散热 （BTU） | 1909W at Full Load, Batteries Charged |
| 1米处的噪声 | <55* |
| 工作温度 | 0°C to 40°C |
| 标志 | CE |
| 电磁兼容 | IEC/EN 62040-2 Category C3 |
| 存储温度 | 0°C to 40°C |
| 相对湿度 | 5 to 95%, no condensation allowed |
| 海拔高度 | 1000m above sea level |
'Due to continuing product improvement programs, specifications are subject to change without notice.
公司网站：www.eaton-ups.com
